Bharosa Desh Ka
Bharosa Desh Ka
Find the right Coolcut from the metal you machine. Select a product to jump to its full datasheet.
| Product | Mild Steel | Stainless Steel | Low-Med Tensile Steel | Cast Iron | Ferrous Metals & Alloys | Copper | Brass | Aluminium |
|---|---|---|---|---|---|---|---|---|
| Atlantis Coolcut SS AL35Semi Synthetic Grade | Not recommended | Not recommended | Not recommended | Not recommended | Not recommended | Suitable | Suitable | Suitable |
| Atlantis Coolcut SS P25Semi Synthetic Grade | Suitable | Not recommended | Suitable | Not recommended | Suitable | Not recommended | Not recommended | Not recommended |
| Atlantis Coolcut SS PCI 8Semi Synthetic Grade | Suitable | Suitable | Suitable | Suitable | Suitable | Not recommended | Not recommended | Not recommended |
| Atlantis Coolcut SS CI 50Semi Synthetic Grade | Suitable | Suitable | Suitable | Suitable | Suitable | Suitable | Suitable | Not recommended |
| Atlantis Coolcut SS BF 45Semi Synthetic Grade | Suitable | Suitable | Suitable | Suitable | Suitable | Suitable | Suitable | Suitable |
Soluble (emulsifiable) mineral cutting oil for general-purpose machining and grinding of ferrous and non-ferrous metals.
Suitable for: Metal cutting & grinding (ferrous & non-ferrous)
Atlantis Coolcut M114 is formulated from leading edge base oils, additives and proprietary emulsifiers which have a bearing on the stability of the emulsion even with water of 400 ppm hardness. A stable milky white emulsion is prepared by adding the oil to water with continuous stirring. Atlantis Coolcut M114 gives the desired cooling characteristics, provides rust protection and lubricity for the cutting operation with good finish of work piece and longer life for tools. Atlantis Coolcut M114 is also fortified with appropriate biocides to keep control of bacterial growth.
Atlantis Coolcut M114 is recommended for a variety of cutting operations in both ferrous and non-ferrous metals. The recommended concentration is between 2 to 10% depending on the severity of machining. Atlantis Coolcut M114 meets IS 1115-1986 (RA 2002).
Caution: Not recommended for machining of magnesium, as fine chips of magnesium are a fire hazard when moistened with water.
| Name | Methods | Units | Atlantis Coolcut M114 |
|---|---|---|---|
| Appearance | Visual | - | Clear & Bright |
| Colour | Visual | - | Brown |
| Emulsion Test, 5:1 & 20:1 in 400 ppm water, 24 Hrs | IS 1448 P 98 | - | Passes |
| Frothing Test, 5:1 & 20:1 in 200 ppm water | IS 1448 P 99 | ml | 20 ml froth, collapses in 10 sec |
| Water Content, % Weight | IS 1448 P 40 | % | 1.82 |
| Thermal Stability | IS 1448 P 100 | - | Passes |
| Ash % | IS 1448 P 40 | % | 0.9 |
| Copper Strip Corrosion, 100°C 3 Hrs | IS 1448 P 15 | - | 1a |
| Volatile Matter at 100°C 16 Hrs, % by mass | IS 1115-1986 | % | 1.1 |
| Cast Iron Corrosion Test, 20:1 in 400 ppm water | IS 1115-1986 (App A) | - | 0/1-1 |
| Flash Point | IS 1448 P 69 | °C | 207 |
Values are indicative in nature and may vary from batch to batch due to normal manufacturing tolerances.
Water-miscible semi-synthetic metalworking fluids, each formulated for particular metals. Use the grid above to match a fluid to the metal you machine.
Suitable for: Aluminium / Copper / Brass
Atlantis Cool Cut SS AL35 is an advanced semi-synthetic product crafted to deliver unparalleled performance across diverse multi-metal applications. Designed for both moderate and heavy-duty machining and grinding, it strikes the perfect balance between efficiency and cost-effectiveness. It is engineered to excel with cast iron, ferrous metals, alloys, aluminium, copper, and brass. Atlantis Cool Cut SS AL35 guarantees smooth, reliable, and high precision operations and also elevates your industrial processes with this cutting-edge solution, setting a benchmark for superior performance and dependability.
Atlantis Cool Cut SS AL35 is a high-quality solution for a diverse selection of water-based metalworking fluids renowned for their superior corrosion inhibition properties.
Atlantis Cool Cut SS AL35 can be employed in various metal operations including grinding, milling, cutting, drilling, bending and forming etc. because of its excellent performance.
All packages should be stored in shelter. Where outdoor storage is unavoidable, drums should be stored straight to avoid the possible ingress of water and drum discoloration. Products should not be stored above 60°C, in direct sunlight or in freezing conditions.
Note: Typical characteristics below are measured for a 5% emulsion.
| Name | Methods | Units | Atlantis Coolcut SS AL35 |
|---|---|---|---|
| Appearance (DM Water) | - | - | Translucent |
| Hard Water Stability | - | - | Stable up to 1000 ppm |
| pH Value | - | - | 9 to 10 |
| Break Point % | IP 287 | % | 3% |
| RI Factor | - | - | 1.3 |
| Foaming Test (DM Water) | - | sec | 20 |
| Aluminium 5000 series corrosion test | - | - | Pass |
| Aluminium 6000 series corrosion test | - | - | Pass |
| Aluminium 7000 series corrosion test | - | - | Pass |
| Brass, Copper corrosion test | - | - | Pass |
Values are indicative in nature and may vary from batch to batch due to normal manufacturing tolerances.
Suitable for: Mild Steel / Low to Medium Tensile Steel / Ferrous Alloys
Atlantis Cool Cut SS P25 is a water miscible metal working fluid ideal for a wide range of moderate machining and grinding tasks. It excels in applications involving all ferrous and its alloy metals. Atlantis Cool Cut SS P25 ensures optimal machining conditions, providing reliability and efficiency in industrial operations.
Atlantis Cool Cut SS P25 is ideal for materials like mild steel, stainless steel, low-to-medium tensile steel and ferrous alloys.
Atlantis Cool Cut SS P25 can be employed in various metal operations including grinding, milling, cutting, drilling, bending and forming etc. because of its excellent performance.
All packages should be stored in shelter. Where outdoor storage is unavoidable, drums should be stored straight to avoid the possible ingress of water and drum discoloration. Products should not be stored above 60°C, in direct sunlight or in freezing conditions.
Note: Typical characteristics below are measured for a 5% emulsion.
| Name | Methods | Units | Atlantis Coolcut SS P25 |
|---|---|---|---|
| Appearance (DM Water) | - | - | Translucent |
| Hard Water Stability | - | - | Stable up to 800 ppm |
| pH Value | - | - | 9 to 10 |
| Break Point % | IP 287 | % | 3.5% |
| RI Factor | - | - | 1.8 |
| Foaming Test (DM Water) | - | sec | 20 |
Values are indicative in nature and may vary from batch to batch due to normal manufacturing tolerances.
Suitable for: Mild Steel / Stainless Steel / Low to Medium Tensile Steel / Cast Iron / Ferrous Alloys
Atlantis Cool Cut SS PCI8 is a water miscible metal working fluid, which is ideal for a wide range of moderate machining and grinding tasks. It excels in applications involving cast iron, all ferrous and its alloy metals. Atlantis Cool Cut SS PCI8 ensures optimal machining conditions, providing reliability and efficiency in industrial operations.
Atlantis Cool Cut SS PCI8 is ideal for materials like mild steel, stainless steel, low-to-medium tensile steel, cast iron, and ferrous alloys.
Atlantis Cool Cut SS PCI8 can be employed in various metal operations including grinding, milling, cutting, drilling, bending and forming etc. because of its excellent performance.
All packages should be stored in shelter. Where outdoor storage is unavoidable, drums should be stored straight to avoid the possible ingress of water and drum discoloration. Products should not be stored above 60°C, in direct sunlight or in freezing conditions.
Note: Typical characteristics below are measured for a 5% emulsion.
| Name | Methods | Units | Atlantis Coolcut SS PCI 8 |
|---|---|---|---|
| Appearance (DM Water) | - | - | Translucent |
| Hard Water Stability | - | - | Stable up to 1000 ppm |
| pH Value | - | - | 9 to 10 |
| Break Point % | IP 287 | % | 2.5% |
| RI Factor | - | - | 1.5 |
| Foaming Test (DM Water) | - | sec | 15 |
| Brix Value | - | - | 3.4 |
Values are indicative in nature and may vary from batch to batch due to normal manufacturing tolerances.
Suitable for: Mild Steel / Stainless Steel / Low to Medium Tensile Steel / Cast Iron / Ferrous Metals & Alloys / Copper / Brass
Atlantis Cool Cut SS CI50 is an advanced semi-synthetic low oil content product crafted to deliver unparalleled performance across diverse multi-metal applications. It is designed for both moderate and heavy-duty machining and grinding and it strikes the perfect balance between efficiency and cost-effectiveness. It is engineered to excel with cast iron, ferrous metals, alloys, copper, and brass. Atlantis Cool Cut SS CI50 guarantees smooth, reliable, and high precision operations and also elevates your industrial processes with this cutting-edge solution, setting a benchmark for superior performance and dependability.
Atlantis Cool Cut SS CI50 is a high-quality solution for a diverse selection of water-based metalworking fluids renowned for their superior corrosion inhibition properties.
Atlantis Cool Cut SS CI50 can be employed in various metal operations including grinding, milling, cutting, drilling, bending and forming etc. because of its excellent performance.
All packages should be stored in shelter. Where outdoor storage is unavoidable, drums should be stored straight to avoid the possible ingress of water and drum discoloration. Products should not be stored above 60°C, in direct sunlight or in freezing conditions.
Note: Typical characteristics below are measured for a 5% emulsion.
| Name | Methods | Units | Atlantis Coolcut SS CI 50 |
|---|---|---|---|
| Appearance (DM Water) | - | - | Transparent |
| Hard Water Stability | - | - | Stable up to 1000 ppm |
| pH Value | - | - | 9 to 10 |
| Break Point % | IP 287 | % | 2.5% |
| RI Factor | - | - | 1.8 |
| Foaming Test (DM Water) | - | sec | 15 |
| Aluminium 5000 series corrosion test | - | - | Pass |
| Aluminium 6000 series corrosion test | - | - | Pass |
| Aluminium 7000 series corrosion test | - | - | Pass |
| Brass, Copper corrosion test | - | - | Pass |
Values are indicative in nature and may vary from batch to batch due to normal manufacturing tolerances.
Suitable for: Mild Steel / Stainless Steel / Low to Medium Tensile Steel / Cast Iron / Ferrous Metals & Alloys / Copper / Brass / Aluminium
Atlantis Cool Cut SS BF45 is an advanced semi-synthetic product crafted to deliver unparalleled performance across diverse multi-metal applications. Designed for both moderate and heavy-duty machining and grinding, it strikes the perfect balance between efficiency and cost-effectiveness. Engineered to excel with cast iron, ferrous metals, alloys, aluminium, copper, and brass, Atlantis Cool Cut SS BF45 guarantees smooth, reliable and high precision operations. It offers boron & secondary amine free formulations. Elevate your industrial processes with this cutting-edge solution, setting a benchmark for superior performance and dependability.
Atlantis Cool Cut SS BF45 is a high-quality solution for a diverse selection of water-based metalworking fluids renowned for their superior corrosion inhibition properties.
Atlantis Cool Cut SS BF45 can be employed in various metal operations including grinding, milling, cutting, drilling, bending and forming etc. because of its excellent performance.
All packages should be stored in shelter. Where outdoor storage is unavoidable, drums should be stored straight to avoid the possible ingress of water and drum discoloration. Products should not be stored above 60°C, in direct sunlight or in freezing conditions.
Note: Typical characteristics below are measured for a 5% emulsion.
| Name | Methods | Units | Atlantis Coolcut SS BF 45 |
|---|---|---|---|
| Appearance (DM Water) | - | - | Slight Cloudy |
| Hard Water Stability | - | - | Stable up to 500 ppm |
| pH Value | - | - | 9 to 10 |
| Break Point % | IP 287 | % | 3% |
| RI Factor | - | - | 1.1 |
| Foaming Test (DM Water) | - | sec | 30 |
| Aluminium 5000 series corrosion test | - | - | Pass |
| Aluminium 6000 series corrosion test | - | - | Pass |
| Aluminium 7000 series corrosion test | - | - | Pass |
| Brass, Copper corrosion test | - | - | Pass |
Values are indicative in nature and may vary from batch to batch due to normal manufacturing tolerances.
Talk to our team for pricing, availability and the right grade for your equipment.